

	ap-utils A command line program to control wireless access points. Untested, command line interface. Licence: GPL Works in 640x480: N/A Download: ap-utils_1.4-1_arm.ipk Package Information: Package: ap-utils Priority: optional Section: Console Version: 1.4-1 Architecture: arm Maintainer: Helmut Kolb Depends: Installed-Size: 596KB Cardinst: disabled Filename: ap-utils_1.4-1_arm.ipk Size: 242888 MD5Sum: 9611362ca92933e6e9b7de7f4f4cb349 Description: Access Point SNMP Utils for Linux A set of utilities for remotely administrating a variety of wireless access points via SNMP. Includes the following binaries: * ap-atmel - to config and get stats from an Atmel-chipset based AP * ap-nwn - to config and get stats from devices that support MIB-II, IEEE 802.11 MIB and NWN DOT11EXT MIB * ap-mrtg - to get stats from an AP and return them in MRTG parsable format * ap-trapd - to receive, parse and log trap messages from an AP . Access points supported include Global Sun ProWave GL2411AP, Compex WavePort WP11, Linksys WAP11, SMC MC2655W, Netgear ME102, Edimax WLAN Access Point, D-Link DWL 900AP and Eumitcom WA3001A. Others based on Atmel chipsets or supporting MIB-II, IEEE 802.11 MIB and NWN DOT11EXT MIB should also work.